Description
The Rx-Acid Scavenger family of products provides a convenient way to neutralize or “scavenge” acid in refrigeration, air conditioning systems after burnouts or during normal on-going system maintenance. Normal dosage treatment of any Rx-Acid Scavenger product will address up to one gallon of system oil. All Rx-Acid Scavenger products are formulated for use with all lubricants - mineral, alkylbenzene, polyol ester (POE) and polyvinyl ether (PVE) lubricants. The traditional Rx-Acid Scavenger product uses a two fluid ounce treatment, whereas the new Rx-Acid Scavenger Connect Inject uses a new formulation to improve the acid scavenging rate in POE and PVE lubricant systems.
Directions for Liquid Bottle (4301-02)
After Burnouts:
1. Remove and properly dispose of used oil and refrigerant, and replace burned out compressor.
2. Establish system’s oil capacity.
3. Determine the required amount of Rx-Acid Scavenger using the dosage chart on the enclosed detailed instructions.
4. Add Rx-Acid Scavenger to system as directed by adding the product directly into the compressor of an opened system or injected directly by using the Universal Treatment Injector (P/N 4779-0). Return system to service.
For Directions on the pressurized can (4301-05) and Connect Inject (4301-06), please see below Product Bulletin.
Directions for Liquid Bottle (4301-02)
After Burnouts:
1. Remove and properly dispose of used oil and refrigerant, and replace burned out compressor.
2. Establish system’s oil capacity.
3. Determine the required amount of Rx-Acid Scavenger using the dosage chart on the enclosed detailed instructions.
4. Add Rx-Acid Scavenger to system as directed by adding the product directly into the compressor of an opened system or injected directly by using the Universal Treatment Injector (P/N 4779-0). Return system to service.
For Directions on the pressurized can (4301-05) and Connect Inject (4301-06), please see below Product Bulletin.